350 sanitary type uses a flat membrane to directly sense the pressure signal, uses the diffusion silicon pressure core as the sensitive element, and uses standard silicone oil or olive oil as the pressure transmission medium. The measuring end is made of 316L stainless steel with a special welded flush isolation diaphragm. Compact structure, corrosion resistance, vibration resistance, wide temperature compensation.
The hygienic type can directly feel the pressure due to the exposed force diaphragm on the threaded end face, which can prevent scaling, unsanitary and viscous pressure clogging and other problems. It is especially suitable for the pressure measurement of viscous fluids with sanitary requirements in the medical and food industries. , blockage, cleanliness and other issues. It is widely used in food, medicine, winemaking and other hygienic industries and pressure testing where the measuring medium may be fouled.
| Performance parameters | |
| Measuring range | -100kPa…0~10kPa…10MPa |
| pressure type | Gauge pressure, absolute pressure, sealing pressure |
| Power output | 4~20mA(12~30VDC) 0~5V、1~5V、0.5~4.5V、0~10V (12~24VDC) |
| precision | 0.5%FS |
| Hysteresis and Repeatability | 0.1%FS |
| Warm drift | 1.5%FS(@-20℃~85℃) |
| Response time | ≤1ms (Up to 90%FS) |
| service life | ≥10×106 pressure cycle |
| Operating temperature | -20℃~85℃ |
| Storage temperature | -40℃~85℃ |
| medium temperature | -40~85℃ (without heat sink) |
| -40~150℃ (Three heat sinks)、-40℃~250℃ (Five heat sinks) | |
| Insulation resistance | ≥100MΩ/250VDC |
| Anti-vibration performance | Sinusoidal：20g, 25Hz~2kHz；IEC 60068-2-6 |
| random：7.5grms, 5Hz~1kHz；IEC 60068-2-64 | |
| Protection class | IP65 |
| media compatible | Various media compatible with 316L stainless steel |
| Explosion-proof grade | Intrinsically safe explosion-proof ExiaⅡCT6 |
| Connector code | J5: Big Hersman | J1: 2088 housing |
| Dimensions Unit: mm |  |  |
| Protection class | IP65 | IP65 |
| Wiring method (current output) | 1 pin: power 2 feet: current output |  |
| Wiring method (voltage output) | 1 pin: power 2 feet: GND 3 feet: voltage output |  |
| Heatsink Code | T3: 3 fins | T5: 5 fins |
| Dimensions Unit: mm |  |  |
| Can be threaded | M20×1.5-6g、G1/2、M30×1.5 | M20×1.5-6g、G1/2 |
| thread code | C1：M20×1.5-6g | C2：G1/2 | C7：NPT1/2、Z1/2 |
| Dimensions Unit: mm |  |  |  |
| thread code | C10：R1/2、PT1/2、ZG1/2 | C17：G1 | C26：M30×1.5 |
| Dimensions Unit: mm |  |  |  |
| Range code | pressure type | Measuring range | Overload pressure | burst pressure | Remark |
| 10k | G | 0~10kPa | 300％FS | 500%FS | |
| 20k | G | 0~20kPa | 300％FS | 500%FS | |
| 35k | G | 0~35kPa | 300％FS | 500%FS | |
| 70k | G | 0~70kPa | 300％FS | 500%FS | |
| 100k | G、A | 0~100kPa | 200％FS | 300%FS | |
| 160k | G | 0~160kPa | 200%FS | 300%FS | |
| 250k | G | 0~250kPa | 200％FS | 300%FS | |
| 400k | G | 0~400kPa | 200％FS | 300%FS | |
| 600k | G | 0~600kPa | 200％FS | 300%FS | |
| 1M | G、S | 0~1MPa | 200％FS | 300%FS | |
| 1.6M | G、S | 0~1.6MPa | 200％FS | 300%FS | |
| 2.5M | G、S | 0~2.5MPa | 200％FS | 300%FS | |
| 6M | S | 0~6MPa | 150％FS | 300%FS | |
| 10M | S | 0~10MPa | 150％FS | 300%FS |
Note: G gauge pressure, A absolute pressure, S sealed pressure
Reviews
There are no reviews yet.